Dầu Truyền Nhiệt Seriola D TH
Industrie & Spécialités
28 november 2001 (supersedes 11 may 2001)
Seriola D TH
This lubricant used as recommended and for the application for which it has been designed does not present any particular risk.
A material safety data sheet conforming to the regulations in use in the E.C. can be obtained from your local commercial adviser or down loaded from
Seriola D TH
Heat transfer fluid
Cleaning additive for heat transfer circuits.
Heat transfer oils circuits
cleaning before drain
l SERIOLA D TH is used diluted in the fluid of the circuit requiring cleaning.
l SERIOLA D TH is only used for cleaning operations
l Add 5 % minimum of SERIOLA D TH in the circuit 24 to 48 hours before oil
change while maintaining the fluid circulation at the normal use temperature (250
°C or more).
l Replace the filters before refilling the circuit with new oil.
high heat transfer
l SERIOLA D TH has a high detergency and dispersiveness level; an excellent
l SERIOLA D TH is completely miscible with all mineral-based heat transfer oils.
Please contact technical support for details of use with synthetic heat transfer
CARACTERISTIQUES TYPES METHODS UNITS Seriola D TH
Specific gravity at 15 °C ISO 12185 kg/m3
Kinematic viscosity at 40 °C ISO 3104 mm2
Kinematic viscosity at 100 °C ISO 3104 mm2
Flash point OC ISO 2592 °C 203
Aniline point ISO 2977 °C 58
Above characteristics are mean values given as an information.