MOBILMET 411

Dầu cắtt gọt kim loại MOBILMET 411
Mobilmet 400 Series
Premium Non-Corrosive to Copper, Moderate Duty Straight Cutting Oils
Product Description
Mobilmet 400 Series products are high-performancemulti-purpose cutting oils. They are chlorine-free, non-staining
and non-corrosive. They are designed for light to moderate duty cutting operations and they are also suitable
as machine tool lubricants and for use in light duty hydraulic systems. They are formulated from high quality
base oils and select additives to provide effective machining performance in a wide variety of operations of both
ferrous and non-ferrous metals. The oils are light-colored and transparent so that the work area can be clearly
seen at all times. The higher viscosity Mobilmet 420’s are formulated to prevent the formation of oil mist in the
vacinity of the machine tool.
Mobilmet 400 Series fluids are resistant to foaming, even with excess splashing so that superior performance
is provided in the machine tool lubrication system. With relatively low pour points and high viscosity indexes,
they are not difficult to dispense in cold conditions and provide adequate film strength in hot-running machine
tool bearings under load.
Features and Benefits
In addition to their machining performance characteristics, the MobilMet 400 Series fluids are multi-purpose in
nature which helps reduce the problems associated with cross-contamination, thus improving production and
reducing rejects. They are formulated using chlorine-free additives reducing the environmental impact of disposal
and spillage. The Mobilmet 400 Series fluids control built-up edge and protect the tool tip from wear. They provide
improved surface finish that may eliminate the need for finish turning or forming before grinding.
Features and potential benefits of Mobilmet 400 products include:
Features Advantages and Potential Benefits
Increased production resulting from longer tool life and
reduced downtime for tool changes and wheel dressing
Excellent machining performance
Improved surface finish and dimensional
accuracy resulting in fewer rejects and better quality
finished products
Feed rates and machine speeds
Fewer cutting oils required, potential for reduced
inventory costs
Suitable for a wide range of ferrous and non-ferrous
metals and machining operations
Eliminates cross-contamination problems and provides
further inventory benefits
Multi-service capability
Light, transparent colour Provides a clear view of the work area at all times
Light, transparent colour Provides a clear view of the work area given at all times
Help contribute to a safer and more pleasant working
environment
Reduction of oil mist (Mobilmet 420 Series)
1 of 2
Applications
Mobilmet 400 Series fluids are recommended for a wide range of machining operations on all types of metals.
They can be used as multi-purpose oils when a common fluid is required for machine tool lubrication and as a
hydraulic fluid assuming proper viscosity selection.
• Mobilmet 411 is recommended for machining aluminum, magnesium and copper, brasses and bronzes.
It is particularly suited for deep hole drilling and similar high-speed operations. It can also be used for
high-speed, light feedmachining of screw stock steels and as a lubricant for high-speed spindles
• Mobilmet 423 and Mobilmet 424 may be used with all of the metals covered by Mobilmet 411 and, in
addition, they are recommended for steels and cast irons having a Brinnel hardness up to 200. They can
be used for severe cutting operations of difficult-to-machine non-ferrous alloys such as silicon-copper,
silicon-bronze and copper-nickel. They are very effective lubricants for the machine tool lubrication system
under a wide range of temperature conditions
• Mobilmet 426 and Mobilmet 427 are recommended for critical machining of non-ferrous metals and
automatic operations on materials having a Brinnel hardness up to about 300
Typical Properties
Mobilmet 400 Series 411 414 417 422 423 424 426 427
Viscosity, ASTM D
445
cSt @ 40º C 5.9 23.7 46.5 10 16.1 22 35.3 43.3
cSt @ 100º C 3.7 4.5 6.2 6.9
Viscosity Index, 139 115 110
ASTM D 2270
Pour Point, ºC, ASTM -7.5 -12.5 -12.5 -7.5 -15 -21 -15 -12
D 97
Flash Point, ºC, 120 204 210 158 182 176 210 212
ASTM D 92
Specific Gravity 0.845 0.871 0.891 .845 0.859 0.869 0.874 0.877
@15º C kg/l, ASTM
D 1298
Copper Strip 1B (max) 1B (max) 1B (max) 1B (max) 1B (max) 1B (max) 1B (max) 1B (max)
Corrosion, ASTM D
130, 3 hrs @ 100º C
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used
for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are
followed. MSDS’s are available upon request through your sales contract office, or via the Internet. This product
should not be used for purposes other than its intended use. If disposing of used product, take care to protect
the environment.
The Mobil logotype, the Pegasus design, and Mobilmet are trademarks of Exxon Mobil Corporation, or one of
its subsidiaries.
ExxonMobil Lubricants & Specialties
All products may not be available locally. For more information, contact your local sales office or visit www.exxonmobil.com.
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or
supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil affiliate entities. Due to continual product
research and development, the information contained herein is subject to change without notification. Typical Properties may vary slightly.
© 2007 Exxon Mobil Corporation. All rights reserved.
2 of 2

Trả lời

Thư điện tử của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *